Preventive Fire and Explosion Protection
ATEX provides two types of systems to prevent the potential of an explosion event. By detecting the incipient fire before a deflagration ignition occurs they prevent an explosion from developing. The ATEX CO system increases the reliability of any protections system. When combined with explosion suppression systems they can lower operational and maintenance cost significantly.
CO Fire Detection & Control Systems
ATEX CO Systems can detect the incipient development of a fire by sensing and comparing the inlet and outlet air for CO content. This allows the operator to manually or automatically correct the problem eliminating the explosion potential & lower maintenance costs.
CO Detection System
Product Information
Infra Red Spark Detection Systems
Using GreCon Systems ATEX can provide a custom engineered spark detection system to detect and suppress sparks and burning embers as they travel down ductwork preventing them from entering process equipment and causing an explosion.
greconsystem
Product Information
Explosion Isolation Systems
Isolation systems are required by the National Fire protection Associations standards on Explosion Prevention in hazardous areas. They provide an effective means of stopping the propagation of flame and /or pressure. ATEX provides various explosion isolation systems to stop the spread of an explosion through ductwork, etc. to other areas or process equipment.
ATEX Quick Sliding Valves
AQS Valves provide a positive barrier stopping both flame and pressure from propagating from one process vessel to another
Quick Sliding Valve
Product Information
ATEX Chemical flame Barriers
Provide isolation of flame and mitigate the potential of an explosion traveling from one process vessel to another.
Dry Chemical Explosion Suppression
Product Information
Rico Ventex isolation valves
Standard Ventex valves provide isolation of an explosion without electrical activation. Valves are available for even ST3 dust.
Ventex Valve
Product Information
Thorwesten Diverters
Explosion diverters provide a cost effective means of mitigating the propagation of an explosion through ductwork.
Explosion diverter
Product Information
Explosion Venting Systems
ATEX provides explosion venting systems to release the pressure and flame of a deflagration in controlled manner to a safe area. ATEX has systems that can provide explosion venting for process vessels inside and outside of the protected facility.
When coupled with the required isolation methods ATEX systems can provide a total systematic approach meeting NFPA standards cost effectively
Rembe Explosion Vents
Three ply (SS/PTF/SS) domed vents are available in various size and pressure rating. Sanitary vents are available for food grade use
Venting Panels
Product Information
Q-PEX Flameless Venting
Providing a means of venting an explosion within a facility and isolating its propagation to another process vessel or facility area.
Q-PEX Flameless Vent
Product Information
Thorwetsen Explosion Doors
Vents doors provide an effective means to handle explosion venting when reusability is a concern and fire mitigation is an advantage.
Thorwesten Doors
Product Information
Explosion Suppression Systems
ATEX provides explosion suppression systems to extinguish the flame from a deflagration and mitigate the associated pressure damaged to the protected area. When the process medium is hazardous to the environment, the process equipment is too far from an outside wall or cannot be protected by the QPEx system then explosion suppression provides the best protection available for your application
ATEX Analog Sensors
Analog sensors provide superior service to standard explosion detectors. The units can be supervised for functionality while standard detectors can only have their wiring supervised. Their rate of explosion rise detection eliminates false releases and provides superior detection
ATEX PXD Sensor
Product Information
ATEX High Rate discharge Containers
HRD's provides the first non-pyrotechnic valve. The valve can be tested without the replacement of parts. Standard units require complete activator replacement with an untested unit after each response. The unit has a dual redundant coil valve for reliability.
dc
Product Information
ATEX Explosion Guard Hot Water Atomizer Suppressor
The ATEX Explosion Guard HOT Water Atomizer Suppressor is the next generation protection option requiring minimal parts replacement after activation and major advances in cost control for initial and operational costs.
hw2
Product Information
ATEX Wiring Cable
The cable is suitable for detection and firing circuits. The jacketed cable has 3 conductors shielded with braided metalic and marked " For ATEX Explosion Protection and not to be placed near high voltage cables".
|
